Sometimes a repair call starts with one thing and turns into something else. A homeowner calls about a dead outlet in the kitchen, and the real cause turns out to be a failing breaker that has been tripping intermittently for months. A property manager schedules a ceiling fan swap and the wiring behind the box tells a different story than the panel schedule does. We handle both the job that was called in and the one that shows up behind the wall, and we explain what we found before any additional work is recommended.
That moment, where a small job reveals a bigger condition, is where the conversation matters most. We keep you informed from diagnosis to final test, so nothing moves forward without a clear explanation of what is happening and what it will take to fix it. Lexington's housing stock runs old, and the electrical systems inside those homes reflect decades of additions, modifications, and equipment that was never designed to carry modern loads.
Call (857) 416-5326 and we will scope the work on the phone before anything is scheduled.
Matching a replacement part to an older system is one of the more practical challenges in electrical work on homes of this age. A panel installed forty years ago may take breakers that are still available, or it may take a brand that has been discontinued. A light switch in a 1950s house may sit on wiring that requires a specific style of connection. We identify what is in place before we quote the work.
When a part has to be ordered, we tell you that on the call or at the start of the visit, not after the job is half done. Some jobs can be completed in stages, with the circuit made safe and the finish work scheduled once the right component arrives. Others are better handled start to finish once everything is confirmed in hand. We work out which approach fits the situation and explain it before any work begins.
Some work requires the main service to be off. Panel replacements, service upgrades, and any work at the service entrance need the whole house de-energized. We plan those visits with that in mind, confirm the scope on the call, and give you a clear picture of how long the shutdown is expected to run before we start.
Most outlet, switch, and fixture work only needs the relevant circuit isolated, not the whole panel. That matters when somebody is working from home, when a tenant has to stay in the space, or when a business needs to keep running while the work happens. We identify which circuits are affected, confirm what can stay live, and work around what cannot be shut down.
The plan for any shutdown is settled before the visit, not figured out on arrival. A breaker that keeps tripping is a warning worth heeding, and the same logic applies to power planning: getting it right at the start saves problems later.
A detached garage or outbuilding that has no power, or only a single circuit run from the house years ago, is one of the more common calls we take in this area. The work involves running a feed from the main panel, sizing it for the loads involved, and in many cases installing a subpanel in the outbuilding so circuits can be added later. Electric gate operators need a dedicated circuit and weatherproof wiring, and the connection point has to be planned for the gate's location rather than for convenience.
A ceiling fan installation is straightforward when a ceiling box rated for fan weight is already in place. When it is not, the box has to be replaced before the fan goes up. In older homes where the ceiling wiring runs without a ground, the fan and its switch have to be matched to what is there. We assess the existing wiring before the fan is ordered or brought to the job, so the visit ends with the fan running rather than a return trip.
A subpanel makes sense when an outbuilding needs more than one or two circuits, or when the main panel has no room for additional breakers. The subpanel is fed from the main service, sized to the anticipated load, and grounded and bonded at the outbuilding. This is also the right time to address grounding at any outbuilding that was wired before grounding was required.
Low-voltage work covers the wiring side of video doorbells, structured data cabling, and similar systems. We handle the rough-in and the circuit that feeds it. The device installation and configuration is a separate matter, but the wiring that makes it possible is electrical work, and doing it correctly from the start avoids having to open walls again later.
A whole-home surge protector installs at the main panel and covers every circuit in the house from voltage spikes coming through the utility line. Individual plug-in strips protect the equipment they are plugged into, but they do not cover appliances, HVAC circuits, or anything hardwired. An EV charger or a hot tub often means checking the panel first, and while the panel is open, adding surge protection at that point is a straightforward addition to the scope. Code-compliant wiring on every job means the surge device is installed to the panel manufacturer's requirements, not just clipped in wherever there is room.
The price is confirmed on the call, before anything is scheduled. We ask about the job, scope what is involved, and give you the rate before you commit to a visit. What moves a quote is what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made.
A straightforward outlet replacement is a different scope from the same outlet that turns out to have a loose connection feeding three others. A subpanel installation in a garage with a clear run from the main panel is a different scope from one where the feed has to travel through finished walls. We explain what changes the price and why, before we proceed.
One call gets the problem looked at properly.
We are available every day from 8 AM to 11 PM. When you call, a real person answers. That person knows the trade and can scope the job on the phone, so you understand what the work involves before anything is scheduled. Electrical service scheduled without the runaround means you get a clear scope and a price on the call, and a visit that is planned around what the job actually needs.
When a problem will not keep, we treat it accordingly. Sparking outlets, a panel that is buzzing, or a burning smell near a switch are calls we take seriously and schedule without delay.
When a rental unit is occupied or a commercial space has to stay open, we work out which circuits can be isolated and when the shutdown window fits the tenant's schedule. That conversation happens before the visit, not on the doorstep. We confirm what is available when you book, and the scope and the price are settled on the call.
The gap between tenants is the easiest time to do electrical work that would otherwise mean working around someone's schedule, furniture, and daily routine. Outlets can be relocated, circuits can be added, and panel work can be done without coordinating around a household. Knob-and-tube replacement and aluminum wiring upgrades are both jobs that go more smoothly in a vacant property, because access to walls and ceilings does not require moving around someone's belongings or limiting the hours the power is off.
Access is arranged on the call. If the property manager or landlord is not on site, we confirm how entry is handled and what the plan is for securing the property when the work is done. We keep you informed from diagnosis to final test, which applies to rental properties the same as it does to owner-occupied homes.
We take calls from Lexington and the neighboring communities throughout Middlesex County. The service area includes Arlington, Waltham, Burlington, Lincoln, and the towns around them. If your property is in the area and you are not certain whether we cover your address, ask when you call and we will confirm it.
The work is carried out locally. Calls about this area are answered by someone who knows the trade and can scope the job on the phone, so the conversation is useful from the first minute. The specifics for a job like this are on our electrical services page.
Yes. Call and describe the property and the charger you are considering. We ask about the panel, the available capacity, and the charger's requirements, and we can tell you on the call whether the supply is likely to support it or whether an upgrade is part of the scope.
If a specific component is not available on the day, we explain what is needed, confirm the price for the remaining work, and schedule the follow-up visit to complete it. We do not leave a job in an unsafe state while waiting for a part.
Homes of this age commonly turn up knob-and-tube wiring in original sections of the house, aluminum branch circuits in rooms added or updated in the 1960s and 1970s, and panels that were sized for far lighter loads than the home now carries. Grounding is often absent or incomplete in circuits that were run before it was required. A safety inspection is the clearest way to understand what is in place and what, if anything, needs attention.
Electrical permits are required for most work beyond simple device replacements, and the requirements depend on the scope of the job and whether the work affects the service entrance or adds new circuits. We handle the permit and inspection process as part of the job, so you are not managing that separately. The details for your specific address and project are confirmed when you call and the work is scoped.
Whatever led you to this page, whether it is a repair that has been on the list too long, a panel that is running out of room, or a rewiring project in a home that has never had the electrical work it needed, we handle it.
Call (857) 416-5326 to reach us any day from 8 AM to 11 PM.
Call in the morning. Talk it through. Know the options by the end of the call.
We are ready to take the call and get the work scoped.
Other towns where we take electrical work: Arlington, Waltham, Burlington. Take a look at our full list of areas.
The electrical work a home or building needs covers a wide range, and the right starting point is knowing what a job actually involves before anything is scheduled. We take calls from Lexington and the surrounding Middlesex County area every day from 8 AM to 11 PM. The table below lays out the services we handle, what each one covers, and what is worth knowing before you call.
| Service Type | Scope of Work | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel UpgradesMost Popular | 100-amp to 200-amp service upgrades, Panel replacement and subpanel installation, Load calculation and service-entrance work, Breaker slot expansion for added circuits | Homes adding an EV charger, major appliance, or finished space that the existing panel cannot support | Older 100-amp services were not sized for today's loads. A load calculation is part of how we confirm the right panel size before any work is scoped. |
| EV Charger Installation | Dedicated 240V circuit installation, Panel capacity check before circuit is run, Outlet or hardwired charger connection, Full circuit test before we leave | EV owners adding a Level 2 charger at home or in a garage | Massachusetts has one of the highest EV adoption rates in the country. An EV charger or a hot tub often means checking the panel first. If an upgrade is needed, we scope that as part of the same call. |
| Electrical Repairs and Troubleshooting | Fault tracing and diagnosis, Dead outlets and partial power loss, Flickering lights and buzzing panels, GFCI and AFCI device testing | Any home or building with an unexplained electrical symptom | A burning smell or sparks at an outlet call for prompt attention, so call as soon as you notice either one. We scope the problem on the phone before scheduling so the visit is focused from the start. |
Call (857) 416-5326 to talk through what your home or property needs, get a price on the phone, and schedule a visit that fits your day.
(857) 416-5326