Something usually tips it. A breaker that trips every time the microwave and the toaster run together, an outlet that stopped working months ago and never got looked at, an outdoor light that flickers in the rain. Most people put these things off until the problem gets worse or a new appliance makes the old wiring's limits impossible to ignore. When that moment comes, the call should go somewhere that can scope the job on the phone, explain what it involves, and give a price before anything is scheduled.
We handle the full range of residential and commercial electrical work in Chelsea, from single-outlet repairs to panel replacements and whole-building rewiring projects. Multi-family buildings, older single-family homes, commercial tenants, and property owners managing units between leases all reach us with different problems. We are available every day from 8 AM to 11 PM.
Call (857) 416-5326 and we will tell you what the work involves before you commit to anything.
When you call, a real person answers. That person knows the trade and can scope the job on the phone, so by the end of the call you know what the visit covers and what it will cost. If the problem is urgent, tell us that. We take short-notice calls and handle situations where a circuit is down, an outlet is sparking, or a panel is behaving in a way that cannot wait.
Multi-family buildings and occupied commercial spaces come with their own scheduling requirements. Work that would disrupt a tenant or require a business to shut down a section of its space can often be planned around hours when it causes the least disruption. We confirm what the schedule allows when you call, and we work out access arrangements before the visit rather than on the doorstep.
Electrical service scheduled without the runaround is how every job starts here. The goal is a visit that fits the property's situation, not one that makes a tenant's day harder than it needs to be.
A lot of Chelsea's residential stock was built or wired before modern electrical loads were the norm. Adding a Level 2 EV charger, a high-draw appliance, or a dedicated workshop circuit to a building that was never sized for it is not always straightforward. Before any of that work is scheduled, we calculate the existing panel's available capacity and confirm whether the supply can carry the added load.
If the panel can handle it, we run the circuit and install the connection. If it cannot, the panel upgrade is scoped as part of the same conversation, so you understand the full picture before any work starts. A 100-amp service that made sense decades ago often does not make sense for a home running a charger, a modern kitchen, and a finished basement at the same time.
Where a building has one main panel but a detached garage, a finished basement, or a commercial unit that needs its own circuits, a subpanel is often the right answer. It draws from the main service but gives the secondary space its own breaker positions and its own protection. We size the subpanel to what the space actually needs, run the feeder from the main panel, and handle the grounding and bonding that makes the installation correct rather than just functional.
A breaker that keeps tripping is a warning worth heeding.
Small electrical problems have a way of staying small until they do not. An outlet that stopped working might be a tripped GFCI device two rooms away, or it might be a failing connection that is generating heat behind the wall. A switch that sparks when you flip it is showing a symptom worth diagnosing. An exterior light that flickers in wet weather is often a wiring or connection issue that gets worse over time, not better.
These are not emergencies, but they are not nothing either. A visit that addresses a loose outlet, a sparking switch, and a broken exterior fixture in one trip is more efficient than three separate calls over the course of a year. We scope what you have on the call, confirm the price, and handle it in a single visit where the work allows. Code-compliant wiring on every job means whatever we touch is left in the correct state, not just functional.
One call gets the problem looked at properly.
A new appliance that draws significant power needs its own dedicated circuit sized to its load. That applies to electric ranges, dryers, chest freezers, and high-draw kitchen equipment in commercial kitchens. Workshop equipment and hot tubs have their own requirements: specific voltage, a correctly rated outlet or hardwired connection, and in some cases a disconnect within sight of the unit. We handle the circuit, the connection, and the panel work behind it.
Running a supply from the main building to a detached structure involves a feeder circuit sized to what the space will use, conduit or direct-burial wiring depending on the route, and a subpanel or disconnect at the far end. Electric gates have their own wiring requirements, including a dedicated circuit and sometimes a low-voltage control run alongside it. We assess the route, confirm the panel has capacity, and scope the full job on the call.
Homes built in the 1960s and 1970s across this region often have aluminum branch wiring. The material itself is not the problem. The problem is at connection points where aluminum meets devices rated for copper only. Heat builds at those connections over time. Remediation involves replacing devices with ones rated for aluminum, adding approved connectors at existing terminations, or rewiring specific circuits where the condition warrants it. We assess what is in place and recommend the scope that matches what the wiring actually needs.
An older panel that cannot accept additional breakers, a fuse box that still runs the building, or a panel that shows signs of heat damage or corrosion are all candidates for replacement. We handle the full replacement: disconnecting the old panel, installing the new one, reconnecting the circuits, and confirming that grounding and bonding are correct before the cover goes back on. Where the service entrance needs updating alongside the panel, that gets scoped into the same conversation.
A generator connected without a proper transfer switch is a hazard to the utility line and to anyone working on it. The transfer switch is what isolates the building's wiring from the grid before the generator feeds power in. We install transfer switches for both portable and standby generators, run the generator wiring, and connect the circuits the owner wants backed up. Nor'easters and ice storms knock out power across this region with enough regularity that generator hookups are a consistent part of the work we do here.
The gap between tenants is the cleanest window for electrical work that would otherwise require coordinating around someone's schedule or cutting power to an occupied space. No furniture to work around, no residents to notify, and no disruption to manage. If the unit has wiring that needs updating, outlets that have never had GFCI protection, or a panel position that needs a new breaker, a vacancy is the right time to address it.
Access is arranged on the call. If a property manager or owner needs to be present, we confirm that when we book. If the space can be accessed without someone on site, we work out how that happens before the visit rather than on arrival. We'll trace it, fix it, and test it before we leave.
The price is confirmed on the call. We ask what is happening, scope what the visit involves, and give you the rate before anything is scheduled. What moves the number is the nature of the fault, what has to be opened up to reach it, and whether the existing circuit or panel can carry what is being added. A straightforward outlet replacement and a rewire of a circuit behind a finished wall are different jobs, and the quote reflects that.
If the scope changes once we are on site, we explain why before we proceed and confirm the updated price before any additional work starts. Nothing moves forward without your understanding of what is being done and what it costs.
Call (857) 416-5326 from 8 AM to 11 PM any day of the week.
Describe what is happening, and we will ask what we need to scope it accurately. You will know the price and what the visit covers before you book. Call in the morning. Talk it through. Know the options by the end of the call.
We cover Chelsea and the cities and towns around it throughout Suffolk County and the surrounding area. Everett, Malden, Revere, Winthrop, and Somerville are all within the area we serve. If your property is in one of those communities and you are not sure whether your address is covered, ask when you call. Homeowners in Chelsea often read our electrical services page before getting in touch.
It does. A single-family home and a multi-unit building have different load calculations, different service entrance requirements, and often different utility coordination steps. We assess the building's actual load before recommending a panel size, and we scope the full job on the call so you understand what the upgrade involves before anything is scheduled.
Yes. If life-sustaining or medically necessary equipment is in use, we factor that into the work plan so the circuit it depends on is not interrupted without adequate notice and preparation. Mention it when you call so we can account for it when scoping the visit.
Call (857) 416-5326 and describe the property and what needs to be done.
We scope the work on the call, confirm the price, and schedule the visit for the vacancy window. Access arrangements are worked out before the visit so the job can proceed without waiting on a tenant to be present. We are available every day from 8 AM to 11 PM.
Older multi-family stock in this city tends to have circuits that were added over time without a clear plan, panels that were never upgraded to match the building's actual load, and aluminum branch wiring in units built in the 1960s and 1970s. GFCI protection is often missing in kitchens and bathrooms, and grounding is inconsistent across older units. A diagnostic visit covers all of those conditions and explains what the building actually needs.
Outdoor lighting circuits are run from the main panel or a subpanel, through weatherproof conduit to the fixture locations. We scope the circuit run, the number of fixtures, and the switching arrangement on the call so the installation is planned before the work starts.
Whether the job is a repair call, a panel upgrade, or a rewiring project in an older building, we are available every day from 8 AM to 11 PM. Everett, Malden, Revere, Winthrop, and Somerville are covered alongside Chelsea.
Call (857) 416-5326 to get a quote. We keep you informed from diagnosis to final test.
Electrical service reaches these neighboring areas too: Everett, Malden, Revere, Somerville. Have a look at our full list of areas.
The electrical work a home or building needs covers a wide range, and the right starting point is knowing what a job actually involves before anything is scheduled. We take calls from Chelsea and the surrounding Suffolk County area every day from 8 AM to 11 PM. The table below lays out the services we handle, what each one covers, and what is worth knowing before you call.
| Service Type | Scope of Work | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel UpgradesMost Popular | 100-amp to 200-amp service upgrades, Panel replacement and subpanel installation, Load calculation and service-entrance work, Breaker slot expansion for added circuits | Homes adding an EV charger, major appliance, or finished space that the existing panel cannot support | Older 100-amp services were not sized for today's loads. A load calculation is part of how we confirm the right panel size before any work is scoped. |
| Lighting Installation | Recessed and LED retrofit lighting, Under-cabinet and accent lighting, Exterior security and motion sensor lights, Landscape and driveway lighting wiring | Homeowners updating interior lighting or adding outdoor coverage | Exterior lighting in New England needs weatherproof materials and proper conduit protection to hold up through freeze-thaw cycles and ice. We spec accordingly. |
| Backup Generator Installation | Transfer switch installation, Generator inlet and hookup wiring, Circuit selection for backed-up loads, Code-compliant connection to home panel | Homes in areas where nor'easters and ice storms cause regular outages | The transfer switch is what prevents backfeed onto the utility line during an outage. It is the part of the installation that has to be right, and it is always part of the scope we confirm on the call. |
Call (857) 416-5326 to talk through what your home or property needs, get a price on the phone, and schedule a visit that fits your day.
(857) 416-5326